HSAIRPO CP100 WIRELSS N MINI CPE OUTDOOR 300Mbps 2.4GHz

Hardware

Chipset : MTK7628

Flash : Default 4MB SPI Nor Flash

SDRAM : Default 32MB SDRAM

Interface : 2 *100BaseTX (Auto MDI/MDIX) LAN Port (Passive PoE Supported)

Power Supply : 24V DC /0.5A (PoE)

Button : 1 *Reset Button

Antenna : 2 *12dBi internal antennas

LED Indicators : 1 Power, 1 LAN, 1 LAN2,,2 Signal Strength

Environment :

- Operating Temperature: 0?~40? (32?~104?)

- Storage Temperature: -40~70? (-104?~158?)

- Operating Humidity: 10%~90% non-condensing

- Storage Humidity: 5%~95% non-condensing

Wireless

Standards : IEEE 802.11n, IEEE 802.11g, IEEE 802.11b, IEEE 802.3u, IEEE 802.3

RF Frequency : 2.4~2.4835GHz

Data Rate :

- 802.11n: up to 300Mbps

- 802.11g: up to 54Mbps (dynamic)

- 802.11b: up to 11Mbps (dynamic)

Wireless Security :

- 64/128-bit WEP, WPA/WPA2, WPA-Mixed

Channels : 1-11 (North America), 1-13 (General Europe), 1-14 (Japan)

Modulation Type : DBPSK, DQPSK, CCK and OFDM (BPSK,QPSK,16-QAM/ 64-QAM)

Reception Sensitivity :

- 11M: -81 dBm@10% PER

- 54M: -68 dBm@10% PER

HT20 MCS7: -65 dBm@10% PER

HT40 MCS7: -62 dBm@10% PER

Software

System Status : A summary of wireless status

Operation Mode :

- AP Mode

- Repeater Mode

- Client

- Bridge

- AP+ Client

- Bridge+Client

Network :

- LAN Setting

- Static DHCP Setup

Wireless :

- Basic Setting

- Advanced Setting

- Basic Setting

- Advanced Setting

- Country Region

- Band

- Channel

- DFS

- TX/RX Chain

- Distance

- RF output power

Management :

- Basic Setting

- Upgrade Firmware

- Save/ Reload Setting

- Time Zone Setting

- Password Setting

- System Log

- logout